Conference Programme
9/6/2016
PLENARY MEETING, Room Nr. G 312
IFToMM in MMS developments
marco Ceccarelli
10:30 11:30
General Algorithm for Computing the Theoretical Centering Precision of the Gripping Devices
E.-C. Lovasz, V. Mesaroş-Anghel, C. M. Gruescu, C. E. Moldovan, M. Ceccarelli
11:30 12:20
SECTION I., ROOM Nr. F02
On approach based on Lie groups and algebras to the structural synthesis of parallel robots
Rybak L., Malyshev D., Chichvarin A.
13:30 15:30
On Transfemoral Prosthetic Knee Design Using RRSS Motion and Axode Generation
Jerry D’Alessio, Kevin Russell, Raj S. Sodhi
13:30 15:30
Computation of the contours of a radial double cam based on an approximate course of the 2nd derivative of the displacement law of the working link
Prof. Ing. Miroslav Václavík, Ph.D.; Ing. Petr Jirásko, Ph.D.
13:30 15:30
The Elastic Compression in the Contact Region of a Cam Mechanism General Kinematic Pair
Jiří Ondrášek
13:30 15:30
Life estimation of the contact surfaces
M. Hejnová and J. Ondrášek
13:30 15:30
Design of a Legged Walking Robot with Adjustable Parameters
Y. Zhang, V. Arakelian and J.-P. Le Baron
16:00 17:30
A Novel Four Wheel Vehicle
Santiranjan Pramanik, Dr. S.S. Thipse
16:00 17:30
Spherical ultrasonic motor for space
Taro OOHASHI, Uichi NISHIZAWA, Shigeki TOYAMA
16:00 17:30
Positioning control of a micro manipulation robot based on voice command recognition for the microscopic cell operation
Hidetsugu Terada, Kohji Makino, Hiromitsu Nishizaki, Eri Yanase, Takuya Suzuki, Tsutomu Tanzawa
16:00 17:30
Composite production and industrial robot trajectory calculation
Tomáš Martinec, Jaroslav Mlýnek, Michal Petrů
16:00 17:30
SECTION II., ROOM Nr. F03
Steady state response of multi-disc rotors damped by magnetorheological squeeze film dampers
Jaroslav Zapoměl, Petr Ferfecki
13:30 15:30
Experimental evaluation of a rotor model based foundation identification procedure
Minli Yu, Ningsheng Feng and Eric Hahn.
13:30 15:30
Speed Control of 3-phase Induction Motor in Presence of Sommerfeld Effect
Alfa Bisoi R. Bhattacharyya A.K. Samantaray
13:30 15:30
Researching of the method of separation of fine-grain particles by centrifugation in a liquid medium
A.B.Kydyrbekuly, L.A.Khajieva, G.E.Ybraev
13:30 15:30
Multi-Physical Analysis of the Forces in the Flexible Rotor Supported by the Magnetorheological Squeeze Film Dampers
P. Ferfecki, J. Zapoměl, M. marek
13:30 15:30
Design and development of a heddle shaft mechanism for airjet-weaving machines
Ferdinand Schwarzfischer, Stefan Kurtenbach, Jana Onischke, Burkhard Corves
16:00 17:30
Adaptive Timing of Relay Nozzles of an Air Jet Weaving Loom
Josef Žák
16:00 17:30
Utilization of magnetic accumulators for the traversing rod of the yarn winding system on rotor spinning machines
Jan Valtera
16:00 17:30
Mechatronic Model for Traversing Rod Longitudinal Vibration Analysis
Petr Žabka
16:00 17:30
9/7/2016
POSTER SECTION, entrance hall
Electronic link between the needle cylinder and the dial of the small diameter knitting machine
J. Skřivánek, M. Bílek, O. Baťka and M. Kašpárek
13:30 15:00
Cam Mechanism for Car Seat Testing
P. Srb, P. Kulhavy, V. Fliegel, P. Lepsik
13:30 15:00
Inertia Matrix and Vehicle Driveability
P. Brabec, M. Malý and R. Voženílek
13:30 15:00
Dynamic model of the mechanical system of the needle bar
Jiří Komárek
13:30 15:00
Free vibration frequency spectrum of four-planetary gearing box
Pust L. Pesek L., Radolfova A.
13:30 15:00
Smart rehabilitation splint
Cernohorsky, Cadek
13:30 15:00
Acoustic Solution for a Car Cab Interior
Pavel Nemecek
13:30 15:00
Design of a tribometer for piston rings
R. Voženílek, S. Beroun and J. Břoušek
13:30 15:00
Simulation of isothermal compression test
I. Matoušek
13:30 15:00
Rotary Table Machine Input Parameters Optimization
Aleš Richter, Jiří Ondrášek
13:30 15:00
Analysis of the mechanism of the drill hammer
Konecny Martin
13:30 15:00
Diagnosis of a Common Rail High Pressure Injector System
Petr Starý
13:30 15:00
SECTION I., ROOM Nr. F02
Reduced Order Analyses of Multi-stage Coupled Structures with Main Focus on Disk-dominated Modes
Robby Weber, Arnold Kühhorn
08:30 10:30
Flat Flexural Vibration of Drill-String with an Initial Curvature
L.A. Khajiyeva, A.S. Sergaliyev
08:30 10:30
Possibilities for Reducing Car Gearbox Vibration and Noise
Elias Tomeh
08:30 10:30
Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning
Bernd Beirow, Arnold Kühhorn, Jens Nipkau
08:30 10:30
Offset of Natural Frequencies of Toothed Wheel by Means of Parametric Optimisation
Jacek Stadnicki, Michał Głąbek
08:30 10:30
Nonlinear vibration of nuclear fuel rods
Dyk, Š., Zeman, V.
11:00 12:30
A design of the two architectures of electromagnetic vibration energy harvesting devices
Ing. Marek Maták, Ing. Marek Gašparík, Prof. Ing. Peter Šolek CSc.
11:00 12:30
The Pinion Teeth Temperatures Measured during the Different Power Levels Operation
M.Mazac, M.Maly,
11:00 12:30
Effect of oil viscosity on pulsating flow in pipe
Lumír Hružík, Adam Bureček, Martin Vašina
11:00 12:30
Experimental research and mathematical modeling of scroll machine in air motor mode
Ivlev V.I., Misyurin S.Yu., Nelyubin A.P.
11:00 12:30
Thermal field simulation of repair threads in a hole in the cover a pressure vessel by welding using Sysweld
Roland Jančo, Pavel Élesztos
13:30 15:30
Various strategies of elastic forces evaluation in the absolute nodal coordinate formulation
Radek Bulín, Michal Hajžman
13:30 15:30
Unexpected Vibrations of Relatively Simple Cutting Machine Mechanism
Ing. Pavel Šidlof, CSc., Ing. Zdeněk Braier, Ing. Pavel Klouček, Ph.D., Ing. Jiří Ondrášek, Ph.D.
13:30 15:30
Influence of bubbles in the shock liquid at its compressibility
Michal Sivčák, Tomáš Hruš
13:30 15:30
Procedure for Seismic Analysis of Liquid Storage Tanks using FEM approach and Analytical Models
Martin Sivý, Miloš Musil
13:30 15:30
The improvement of dynamic characteristics of the car according to the direction of the technology evolution
František Palčák
16:00 17:30
Implementation of specific displacement diagrams for control of kinetic sculptures with electronic cams Yaskawa
Pavel Dostrašil
16:00 17:30
New Method of Contactless Measurement and Analysis of CNC Machine Spindle Lopping
Ing. Zdeněk Braier, Ing. Pavel Šidlof, CSc.
16:00 17:30
Semi-automatic transmission in a car
Ing. Marek Gašparík, Ing. Marek Maták, prof. Ing. Peter Šolek, CSc., Ing. Michal Černý
16:00 17:30
The Testing Stand of the Direct Linear and the Torque Servo Drives Siemens Controlled by the Simotion C
Ing. Jaroslav Antoš
16:00 17:30

 Gallery of Participants:
 Note: You can upload your photo on the MyAccount Module.


Mr. PRAMANIK SANTIRANJAN
COLLEGE OF MILITARY ENGINEERING PUNE, INDIA
INDIA

doc. Dr. Ing. Tomeh Elias
Technical University of Liberec Department of Vehicles and Engines
CZECH REPUBLIC

Univ.-Prof. Dr.-Ing. Corves Burkhard
Department of Mechanism Theory and Dynamics of Machines, RWTH Aachen University
GERMANY

Ing., Ph.D. Brabec Pavel
Technical university of Liberec, Department of Vehicles and Engines
CZECH REPUBLIC

prof ceccarelli marco
university of Cassino and South Latium
ITALY

Prof. Segla Stefan
Technical University of Košice, Faculty of Mechanical Engineering
SLOVAKIA

Assoc. prof. PhD. Jančo Roland
Institute of Applied Mechanics and Mechatronics Faculty of Mechanical Engineering Slovak University of Technology in Bratislava
SLOVAKIA

Ing. Janík Michal
VŠB-TU Ostrava, Fakulta strojní
CZECH REPUBLIC

Drd Ene Doina
University Politehnica of Bucharest
ROMANIA

Prof. Stadnicki Jacek
University of Bielsko-Biala
POLAND

prof., Ing., CSc. Václavík Miroslav
VÚTS, a.s.
CZECH REPUBLIC

Ing., Ph.D. Martinec Tomáš
Technical University of Liberec, Institute for Nanomaterials, Advanced Technology and Innovation
CZECH REPUBLIC

Prof. Kaneko Shigehiko
The University of Tokyo
JAPAN

Miss PRADHAN SMITIRUPA
INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR, INDIAN
INDIA

MRS BISOI ALFA
INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR
INDIA

Dr.of Technical Sciences Kydyrbekuly Almatbek
Al-Farabi Kazakh National University
KAZAKHSTAN

Assoc. Prof. Palčák František
Faculty of Mechanical Engineering, STU Bratislava, Slovak republic
SLOVAKIA

Prof. Lovasz Erwin-Christian
Politehnica University of Timisoara
ROMANIA

Nemecek Pavel
Technical university of Liberec
CZECH REPUBLIC